DELCD - Dry Electrolytic Conductivity Detector

  • Non-radioactive alternative to ECD
  • High Sensitivity - Detects down to 10ppb
  • Selective to Chlorinated and Brominated molecules
  • Best used with Headspace or Purge & Trap injectors
  • Can be Combined with FID, NPD, or TID detectors
  • Spare Detector Cell included
Dry Electrolytic Conductivity Detector
The DELCD is useful for low-level detection of chlorinated and brominated solvents in environmental samples and other trace analyses. In the picture above, a DELCD is mounted next to FID and PID detectors on an SRI GC. The three chromatograms below are from a similar SRI GC.
 
The Dry Electrolytic Conductivity Detector possesses sensitivity much like the ECD, except it is more selective to halogens and blind to oxygen. The SRI DELCD differs from the traditional wet ELCD in that it does not use a solvent electrolyte or nickel reaction tube, and the reaction products are detected in the gaseous phase. In the high sensitivity mode (no hydrogen, using dry tank air) the DELCD can detect down to the low picogram range. In this mode, the DELCD is about 100 times more sensitive than the FID/DELCD. However, the high sensitivity DELCD is susceptible to contamination from high concentrations of chlorinated hydrocarbons and hydrocarbon solvents.


Product number:

8690-1026 DELCD detector